Electric Heating Reactor Regular Cleaning Requirements
1. According to the needs of production and operation, regular cleaning of stainless steel reactor sediment, storage of different items should be carried out in accordance with the regulations. Pipe lines and electrical connections must be isolated before tank cleaning. Stainless steel reactor cleaning should be assigned to the safety supervisor in the field command and supervision of the operation (certificate). Stainless steel reactor
2. Make specific and feasible cleaning plans according to the storage variety, category and quantity of stainless steel reaction kettle before tank cleaning; In accordance with the safety requirements of cleaning tank, in case of poisoning and explosion accidents.
3. When the storage tank is ready for cleaning, the flammable gas and flammable, explosive and toxic gas should be discharged completely. Flammable, explosive, toxic liquid emptied, also used inert gas purge.
4. Hand held tools for cleaning flammable, explosive, toxic and dangerous chemicals stainless steel reaction kettle should be sparkless safety tools and cotton cleaning tools.
5. Cleaning flammable, explosive, toxic and dangerous chemicals stainless steel reaction kettle, must be set up construction marks, and unrelated personnel are strictly prohibited to approach.
6. Flammable, explosive, toxic and dangerous chemicals stainless steel reactor cleaning should be timely test tank gas concentration, and take the corresponding safety and individual protection measures. Before the operation, the safety personnel should analyze the risk of entering the equipment and check the can cleaning equipment, the site, fire equipment and the implementation of preventive measures.
7. Flammable, explosive, toxic and dangerous chemicals stainless steel reactor cleaning residue, waste water in accordance with the waste cleaning laws and regulations.
8. Flammable, explosive, toxic and dangerous chemicals stainless steel reaction kettle cleaning operation, the safety person in charge of on-site supervision of the cleaning process.
9. Flammable, explosive, toxic and dangerous chemicals stainless steel reaction kettle cleaning, the safety person should immediately check all parts, return to the normal state.
10. When cleaning and loading toxic cans, operators should have the knowledge of handling corresponding toxic products, and operators should wear gloves and gas protective equipment.
11. Stainless steel reactor empty, should be repeated water, as far as possible will be in the tank residual material pumped out.
12. In case of mechanical ventilation, electricians are responsible for installing temporary fans for mechanical ventilation.
13. Combustible gas detection shall be carried out in accordance with the operating rules. When the concentration of explosive gas exceeds the lower limit of the explosive concentration, operators shall be prohibited from entering the tank.
14. Before the can cleaning operation, the safety officer shall inspect the can cleaning equipment and the site, conduct the can cleaning safety education for the can cleaning operators, and apply for the Permit for Operation in Restricted Space after implementing the monitoring personnel and safety precautions. Operators and guardians shall dress and wear labor protection articles in accordance with regulations.
15. In the process of cleaning stainless steel reactor, if the working conditions change abnormally, the operation must be stopped immediately.
16. The safety guardian should strengthen the on-site safety inspection tour, found violations, the guardian should take back the "access to restricted space operation permit", stop the operation.
17. After the completion of the operation, the person in charge of the cleaning can and the guardian should do a good job of the on-site safety inspection after the cleaning can, count the personnel, tools, etc., timely recover the fire equipment and remove the temporary electricity in time.